Canal Head Gate and Irrigation Pump Install for North Logan Subdivision

Setting up a shared irrigation system for a subdivision is no small job. You're not just running a few pipes - you're pulling water directly from a canal and making sure it gets distributed reliably to multiple homes. That takes real planning, the right equipment, and crews who know what they're doing when it comes to water rights and diversion structures.

Here's what we were working with: a live canal running along the edge of the subdivision, no existing infrastructure, and a need to get water moving efficiently to residents. We installed a head gate directly on the canal - that's the control point where water gets diverted from the main flow into the system. From there, a pump picks it up and moves it where it needs to go.

The head gate itself sits right at the canal bank, with a manual wheel valve for controlling flow. Getting that set properly matters a lot. If it's not seated right or the screen isn't in place, you end up with debris in the line and headaches downstream. We also installed a corrugated metal sump at the pump intake point, which helps collect and stabilize the water before it gets pushed through the system.

The pump and control panel were mounted and wired on-site. That enclosure you see mounted near the fence line houses the electrical controls that manage the pump operation. It's a clean setup - keeps the components protected and gives whoever manages the system easy access without digging around in the dirt every time something needs to be adjusted.

Jobs like this are common in Cache Valley, where a lot of subdivisions and older neighborhoods still rely on secondary water from canals for irrigation. Getting the infrastructure right from the start means homeowners aren't dealing with pressure problems, dry spots, or failed pumps mid-summer when they need water most.